Skip to content
+966 55 636 3678
العربية
Container trucks leaving Jeddah Islamic Port

Industry

Fleet and Equipment Tracking for Construction Companies

Construction fleet tracking uses GPS trackers on machines, trucks and generators to show where each asset is, how many hours it worked and whether it moved after hours. HHET fits wired and battery units for contractors across Saudi Arabia and groups them by project on one platform.

A contractor's fleet is not on a road. It is on eleven sites, a laydown yard and the back of a lowbed, and part of it belongs to a subcontractor who "will bring the loader on Sunday". The result is a familiar set of questions: which excavator is where, who moved the generator, how many hours did the loader work this month, and did that water tanker really do six trips. Construction fleet tracking answers these from data rather than site-manager memory. This page covers the contractor's problems and how HHET's vehicle tracking system deals with them. The wider range of sectors is on the industries overview; device-level detail for machines without power sits on the asset tracking page.

Machines, trucks and tools across many sites

A contractor's problem is not tracking one asset. It is keeping a single, believable register of everything, in a business where kit is moved by phone call. Excavators and loaders go to a new site, tippers are reassigned between projects, generators and compressors ride on a flatbed, and tools disappear into containers. When a project closes, someone has to find what was on it, and when a new one opens, someone has to know what is free.

With construction equipment GPS reporting to one map, the register becomes a by-product of normal work. Each machine appears at its current site, drawn from geofences around project boundaries. Moving a machine from Site A to Site B is visible when it happens, without a transfer form. A manager in Jeddah can open the platform, filter by project and see which machines are on which site, which are idle in the yard and which are on a lowbed in transit. For pickup trucks, tippers and water tankers on public roads, the same screen carries speed and route data, as in standard fleet management.

Excavator and trucks working on a construction site
A machine's position is a fact; a site manager's recollection of where it is is not. The register should follow the first.

Utilisation and engine hours

Hours are money in construction: they set hire charges, service intervals, operator payroll and the cost per cubic metre moved. The usual source is a dashboard hour meter read by hand, or a timesheet from the operator. Both can be wrong in either direction. A tracker wired to ignition or to the machine's power records when the engine is actually on, per day and per site, and distinguishes idle with the engine running from working.

Three conclusions follow from that data:

  • Utilisation by machine. Which loaders earn their keep, and which sit for most of a week. A machine that works twelve hours a month is a candidate for return or redeployment.
  • Hire disputes. A rental invoice charges 220 hours; the record shows 160. The difference is a negotiation with evidence.
  • Service on hours, not on guesswork. Service reminders by engine hours keep oil and filter changes on time, which matters in dust that shortens intervals.
Contractor problemWhat the record showsDecision it supports
Idle excavator on a quiet siteEngine on, no movement for long periodsRedeploy, or challenge the operator's schedule
Plant-hire invoice higher than expectedActual engine hours per day and siteQuery the invoice, or renegotiate hire terms
Missing service intervals in dust and heatCumulative hours against service schedulePlan the service before breakdown
Tipper trips claimed by a subcontractorEntries and exits at quarry and site geofencesPay per verified trip
Water tanker fuel useIdle time and unscheduled stopsStop unplanned diversions

Where machines are billed per trip rather than per hour, geofences at the quarry and the site gate produce a trip count automatically, with time stamps. That puts the weighbridge tickets and the tracking record side by side, so one can check the other. The guide on fleet tracking return on investment shows how to put figures on the savings in your own operation, without relying on generic percentages.

Theft and after-hours movement

Construction sites are targets. Equipment is valuable, sites are large and often unlit at night, and fences and watchmen are not always reliable. The most useful protection is early notice, not recovery after the fact. HHET sets a working-hours schedule per site, and any movement of a machine or truck outside it generates an alert to the site manager and security, with live position. A geofence breach, a tow or a loading onto a trailer at three in the morning is flagged as it starts.

Saudi regulation

Recovering stolen equipment in Saudi Arabia is a matter for the police. A tracker gives a location to report, not authority to act on it. Contractors should give the police the live position and plate or serial details, and avoid confronting thieves themselves. Where an immobiliser or engine cut-off is fitted, HHET advises on safe use; see the page on anti-theft tracking and engine cut-off.

Where a machine has no battery to run a tracker, or the tracker may be removed, the choice of device and the concealment of it matter more than the platform. That belongs on the device pages; the point for a contractor is to decide in advance which of the fleet is worth protecting at what level, and not to leave a high-value generator with the same cover as a pickup.

In practice

Treat after-hours alerts as a rota, not an inbox. Name the person on call each night, a back-up and the number to call at the police, so the first ten minutes are decided before the first alarm.

Subcontractors, hired plant and the handover problem

A large share of a contractor's machines are not owned. Hired excavators arrive with an operator and an invoice, subcontractors bring their own tippers, and at the end of the job everyone argues about hours and trips. Tracking solves this most effectively when it is agreed at the start: hired plant carries a tracker for the term of the hire, subcontractor trucks are added to the account with a site geofence, and the data is the basis of the monthly statement. The record is neutral. It does not accuse anyone; it shows a start time, an end time and a location.

The same discipline helps at handover. When a project closes, the register shows which machines are on site, which have been returned, and which are unaccounted for. That list used to take a week of phone calls. A manager comparing it with the plant schedule can close the project's equipment account in an afternoon, and release machines to the next site without waiting for a physical check.

Recommended HHET solutions

A contractor's set-up is usually three tiers, from the road vehicles to the machines that never leave the site.

Fleet typeRecommended set-up
Pickups, tippers, tankers, lowbedsWired trackers with ignition, speed, route and optional fuel input; WASL-ready where the activity requires it
Excavators, loaders, gradersWired trackers on ignition or machine power, engine hours, site geofences and after-hours alerts
Generators, compressors, towersBattery or solar trackers with motion alert, reporting less often to conserve power
Tool containers and trailersBattery tracker hidden in the structure, door and movement alerts
Head officePlatform with project grouping, weekly utilisation report to project managers

Price depends on the number of machines and the device type, installation on site or in your yard, any fuel sensors, battery versus wired units and the subscription. To scope your fleet, request a quote with your machine list and project locations.

Last reviewed .

Questions, answered

Frequently asked questions

Can I track machines that have no power for a tracker?

Yes. Battery or solar trackers report at longer intervals to conserve power and alert on movement. Machines with an ignition or battery system get wired units that also record engine hours. HHET chooses the device per asset once it has seen your machine list and how each machine is used.

How does engine-hour tracking help a contractor?

It records when each engine is actually on, per day and per site, so you can compare hours against hire invoices, schedule services by hours and see which machines are underused. It replaces hand-read hour meters and operator timesheets with one consistent record you can audit.

Will I be alerted if equipment leaves a site at night?

Yes. HHET sets a working-hours schedule for each site, and movement outside it, or a geofence breach, sends an alert with the live position to the people you nominate. Police recovery then relies on that position and on your equipment and plate details being ready.

Can the system count tipper trips to a quarry?

Yes, using geofences at the quarry and at the site. Each entry and exit is time-stamped, so trips can be counted per truck and checked against weighbridge tickets before a subcontractor is paid. Disputed trips can be reviewed on a map playback.

Can several projects be managed in one account?

Yes. Assets are grouped by project or site, each with its own geofences and managers, while head office sees the whole fleet and consolidated utilisation reports. Moving a machine between projects simply regroups it, with no new setup or new device.

Related services

Often combined with this

Next step

Ready to see your fleet on one screen?

Get a free consultation and a written quote within one working day. No obligation, Arabic or English.

Get a free quote

Tell us about your vehicles. A fleet specialist replies in Arabic or English, usually the same working day.

or

No spam, no call-centre scripts. Your details go to the HHET team in Jeddah only.

Get a quote Call WhatsApp
Chat on WhatsApp