Pricing, compliance, devices
Questions fleet managers ask us
Direct answers on vehicle tracking, GPS devices, TGA and WASL compliance, temperature monitoring and working with HHET in Jeddah.
Home
How much does vehicle tracking cost in Saudi Arabia?
The cost depends on the type of tracker, the number of vehicles, installation and the platform subscription you choose. A plug-in device for one car is priced very differently from a wired fleet tracker with sensors and WASL linking. HHET quotes a complete per-vehicle figure with device, installation, SIM and platform included, so there are no surprises later.
Are your tracking devices approved by the Transport General Authority?
HHET supplies tracking devices and a platform intended for use with the Transport General Authority's WASL system for licensed transport activities. Because the approved-device list and requirements are updated by the TGA, we confirm the current status for your specific activity and vehicle type before quoting, and we tell you plainly if a device is not suitable.
Can you link my vehicles to the WASL platform?
Yes. Where your transport activity requires it, HHET handles the registration of each vehicle and its approved tracking device with the WASL platform as part of the installation, and keeps the device reporting as the regulation requires. Taxi, car rental, bus and freight operators across Saudi Arabia use this service to stay compliant.
How long does installation take?
Most vehicles are completed in a single visit. A plug-in OBD tracker is live within minutes, while a hard-wired tracker with ignition detection takes longer, and adding an engine cut-off relay or sensors extends the visit further. For fleets, our technicians install several vehicles in one trip to your depot in Jeddah or elsewhere in Saudi Arabia.
Do you install outside Jeddah?
Yes. HHET is based in Jeddah and serves customers across Saudi Arabia, including Riyadh, Makkah, Madinah and the Eastern Province. Installation visits outside Jeddah are arranged on request, and fleet installations are usually grouped at your site so each vehicle is fitted and tested on the same day.
Can I track my vehicles from my phone?
Yes. The HHET app shows your vehicles live on a map, replays trips, and sends notifications for events such as speeding, geofence exits and ignition on or off. The same account works in a browser on a desktop, so managers, dispatchers and owners see identical data wherever they are in Saudi Arabia.
Do you offer temperature monitoring for cold rooms and refrigerated trucks?
Yes. HHET monitors temperature and humidity in cold rooms, warehouses, pharmacies and refrigerated vehicles, with alerts when readings leave the range you set and records suitable for Saudi Food & Drug Authority (SFDA) and HACCP audits. Refrigerated trucks can be tracked and monitored together, so location and cargo temperature appear on one screen.
What happens if a device stops working?
Contact HHET support and we first diagnose the device remotely, since many faults are a SIM, power or placement issue that can be resolved without a visit. If the hardware itself has failed, it is repaired or replaced under the warranty terms stated in your quote, and a technician visits where needed to restore tracking.
Vehicle Tracking
What is a vehicle tracking system?
A vehicle tracking system is a GPS device in each vehicle, a SIM that transmits its position and status, and a platform that shows the fleet on a live map with trip history, alerts and reports. Add-on sensors extend it to fuel, driver behaviour, cargo temperature and video.
What is the difference between vehicle tracking and fleet management?
Vehicle tracking tells you where vehicles are and where they have been. Fleet management builds on that data to run the fleet: fuel consumption, driver behaviour, maintenance schedules, utilisation, compliance and reporting. Small operators often start with tracking; fleets of trucks, buses or delivery vans usually need the management layer the HHET platform provides.
Which vehicles must be linked to WASL in Saudi Arabia?
Vehicles used in transport activities licensed by the Transport General Authority, such as taxi, car rental, passenger buses and freight trucks, are required to link an approved tracking device to the WASL platform. Private vehicles and many company cars are not covered. Requirements change, so confirm the current rule for your activity before choosing a device.
Can vehicle tracking reduce fuel costs?
Yes, in most fleets. Tracking exposes the main sources of waste: long idling, unauthorised trips, inefficient routes and harsh driving. Adding a fuel-level sensor shows refuelling and sudden drops that indicate theft. Savings depend on the fleet and how managers act on the reports, so we describe the mechanism rather than promising a percentage.
Can I see where a vehicle was last week?
Yes. The HHET platform stores every position report, so you can replay any day as a route on the map, see stops and their duration, and export trips for a period. History is kept for the retention period in your plan, which is worth checking, since questions about a delivery often arrive weeks after it happened.
How many vehicles do I need to start?
One. HHET fits trackers to single vehicles as well as fleets of hundreds, and the same platform and app are used at every size. Larger fleets benefit from grouped installations at their depot, user roles for managers and dispatchers, and reporting across departments, but there is no minimum to begin.
Devices and Installation
What types of GPS trackers are available for vehicles?
Three main types. OBD plug-in trackers fit the diagnostics port with no wiring. Hard-wired trackers connect to vehicle power, detect ignition, support sensors and can drive an engine cut-off relay. Battery and magnetic trackers need no vehicle connection and suit trailers, equipment and assets. HHET recommends the type based on the vehicle and the job.
Does a GPS tracker need a SIM card?
Any tracker that shows a live position remotely needs a SIM, because the position travels from the vehicle over the mobile network. Devices sold without a SIM either store trips for later download or only work within Bluetooth range. HHET trackers use a managed SIM included in the plan, so there is no credit to top up.
Who supplies the SIM, HHET or my company?
Either. Most customers use HHET-managed SIMs, which are included in the subscription, monitored for connectivity and never expire unnoticed. Companies with their own corporate mobile plans can supply SIMs instead, in which case they manage data and expiry themselves. We explain the trade-offs and configure the trackers for whichever option you choose.
How long does a battery-powered tracker last?
It depends almost entirely on how often the tracker reports. A unit that reports a few times a day lasts far longer than one reporting every minute, and heat shortens battery life, which matters in a Saudi summer. HHET sets the reporting interval to match the asset, and the platform warns you before the battery runs low.
Can a tracker be installed where a thief would not find it?
Yes. Hard-wired trackers are fitted behind the dashboard or in other concealed positions, with wiring routed along factory looms, and the backup battery keeps reporting if the main power is cut. HHET installs trackers for owners protecting their own vehicles and fleets, and the device is registered to the vehicle on the platform.
Will installation affect my vehicle's warranty or electrical system?
A professional installation uses fused connections to the correct circuits, a clean chassis ground and no interference with airbag or CAN bus wiring, and most dealers and leasing companies accept an installation record. Problems arise from improvised splices and poor grounds, which is why HHET technicians test every vehicle on the platform before handing it back.
Temperature Monitoring
What does a temperature monitoring system include?
Sensors placed in the cold room, warehouse, refrigerator or vehicle; a gateway or built-in connection that sends readings to the HHET platform; and the platform itself, which charts the data, stores it, alerts you when readings leave your set range and produces reports. Humidity, door and power sensors can be added to the same system.
How quickly will I be alerted if the temperature goes out of range?
Alerts are sent as soon as a reading crosses the threshold you set, by app notification, SMS or email, with a short delay you can configure to avoid alarms from a door opening briefly. Escalation rules notify a second person if the first does not acknowledge, which matters for night shifts and weekends in pharmacies and warehouses.
Does HHET temperature monitoring meet SFDA requirements?
HHET systems record continuous, time-stamped temperature data, alert on excursions and produce reports in the form inspectors expect, which is what the Saudi Food & Drug Authority's storage and transport requirements call for. Because requirements depend on the product and licence, we review your specific SFDA obligations with you and configure sensors, ranges and records accordingly.
How often should temperature sensors be calibrated?
Follow the interval your quality system or regulator specifies; in regulated pharma and food operations calibration is typically scheduled at a fixed interval and documented with certificates. HHET supplies sensors with calibration documentation and can arrange recalibration or sensor exchange on schedule, so audit records show every sensor was within tolerance.
Can I monitor cold rooms and refrigerated trucks in one system?
Yes. Fixed sensors in cold rooms and warehouses and mobile sensors in refrigerated vehicles report to the same HHET platform, so a product's temperature can be followed from the warehouse, through the truck, to delivery. Vehicle sensors are paired with the GPS tracker, so location and cargo temperature appear together on one screen.
What happens during a power cut or internet outage?
Sensors continue to record on internal batteries, and gateways store readings in memory until the connection returns, so the record stays complete. The platform raises an alert when a site or vehicle stops reporting, and a power-failure sensor can warn you the moment mains supply is lost, before the temperature itself begins to rise.
Jeddah
Where is HHET's office in Jeddah?
HHET is at Al Hayat Commercial, Office 25, Madinah Road, Jeddah. Call +966 55 636 3678 or email info@hhet.sa. The contact page has a map link and working hours. Consultations and device demonstrations are held at the office, and installations take place at our workshop or at your premises.
Do you install at my premises in Jeddah or at your office?
At your premises in most cases. HHET technicians come to your depot, yard or workplace in Jeddah to fit and test trackers and sensors, which keeps vehicles in service and allows a whole fleet to be installed in one visit. Individual vehicles can also be booked for installation by arrangement.
Do you install GPS trackers at our premises in Jeddah?
Yes. Our technicians install at yards, depots and offices across Jeddah, including Al Khumrah, the Jeddah Islamic Port area, the industrial city phases, Obhur and the central districts. For fleets we schedule around your shifts, and each vehicle is usually back on the road within an hour of the technician starting on it.
Do you work with logistics companies around Jeddah Islamic Port?
Yes. Transport and logistics operators moving containers and freight from Jeddah Islamic Port use HHET for truck tracking, WASL linking for licensed freight vehicles, trailer and container tracking, and temperature monitoring for refrigerated loads heading inland. We configure geofences for the port, depots and customer sites so arrivals and departures are logged automatically.
Can you link our rental cars in Jeddah to WASL?
Yes, where your rental or taxi licence requires it. We supply a device from the TGA-approved range, install it, and complete the link on the WASL platform with your vehicle and operator details before the job is closed. Bring the vehicle registration and your operator details to the appointment.
Can I see a demonstration before buying?
Yes. Request a quote or call us and we will arrange a demonstration of the HHET platform and app in Jeddah, either at our office or at yours, using live data so you can judge update intervals, accuracy and reports for yourself. For fleets, we can fit a trial tracker to one of your vehicles.
How quickly can a technician reach us in Jeddah if a device fails?
Most reported faults are resolved remotely, because our support team can see the device's last contact, signal and power from the office. Where a visit is needed, a technician can usually be with you in Jeddah the same or the next working day. Vehicles can also be brought to our workshop.
Which areas around Jeddah do you cover?
All of Jeddah, including the industrial areas, the port district and the airport zone, plus Makkah, Rabigh, King Abdullah Economic City and the wider Makkah region. Beyond the western region, HHET serves customers across Saudi Arabia, with installation visits scheduled on request and remote support available for every site.
Do you provide cold chain monitoring for refrigerated trucks working from Jeddah Islamic Port?
Yes. We fit temperature probes to the same tracker that reports the truck's location, so cargo temperature and position appear together on the HHET platform from the port gate to delivery. Cold rooms and warehouses along the route can be monitored on the same account, with alerts and exportable records.
Do you cover Makkah and Taif from Jeddah?
Yes. Makkah, Taif, Rabigh and King Abdullah Economic City are within a day's reach of our Jeddah team for site installations and service visits. For other regions of the Kingdom we install by arrangement, typically grouping vehicles so that travel does not add much to the cost.
Industries We Serve
Does HHET work with small fleets or only large companies?
Both. HHET installs single vehicles for small businesses and private owners as well as multi-site fleets. The platform scales from one car to thousands of vehicles; pricing and device choice are matched to the size and the use, not to a minimum order.
Can one account cover vehicles in several cities?
Yes. One HHET account can hold vehicles in Jeddah, Riyadh, Dammam and any other city, grouped by branch, department or region. Each manager sees only the groups assigned to them, while head office keeps a view of everything. Installation is scheduled city by city.
Which sectors need WASL linking?
The Transport General Authority requires licensed transport activities, which include taxi, car rental, bus and freight operations, to connect their vehicles to the WASL platform. Requirements are set by the authority and updated over time, so HHET confirms the current rule for your activity before quoting.
Vehicle Tracking System in Saudi Arabia
What is a vehicle tracking system?
A vehicle tracking system is a GPS device in each vehicle, a SIM that transmits its position and status, and a platform that shows the fleet on a live map with trip history, alerts and reports. Add-on sensors extend it to fuel, driver behaviour, cargo temperature and video.
Is vehicle tracking mandatory in Saudi Arabia?
For licensed transport activities regulated by the Transport General Authority (TGA), such as taxi, rental, buses and freight, vehicles typically must carry an approved tracker linked to the WASL platform. Private company fleets outside those activities track by choice. HHET confirms the current requirement for your activity before quoting.
How does a GPS tracking system for cars differ from a fleet management system?
A car tracking system answers where a vehicle is and where it has been. A fleet management system adds the tools to run vehicles as a business: geofences, maintenance reminders, driver scores, fuel reports, user roles and scheduled reports. The hardware is often the same; the platform features differ.
Can one platform track trucks, cars, trailers and machines together?
Yes. The HHET platform shows wired trackers in trucks and cars, battery trackers on trailers and containers, and asset trackers on machines on one map, with user roles so each branch or department sees only its own vehicles. Reports and alerts are set per vehicle group.
How long does installation take and where is it done?
A standard wired installation in a car or van typically takes under an hour per vehicle; trucks with fuel sensors or cameras take longer. HHET installs at its Jeddah base or at your depot anywhere in Saudi Arabia, and each vehicle is tested and documented before handover.
What happens if a tracker stops reporting?
The HHET platform flags devices that have not reported within their expected interval, and our support team investigates: usually a SIM, power or antenna issue. For WASL-linked vehicles this matters, since a silent device can affect compliance, so faults are prioritised and the unit is repaired or replaced.
What does a vehicle tracking system cost in Saudi Arabia?
Cost depends on device type, sensors, vehicle count, reporting interval and subscription term, so HHET quotes per fleet rather than from a price list. A simple wired tracker on a sedan costs far less than a 24 V truck installation with fuel and temperature sensors. Request a quote with your vehicle list for exact figures.
Car GPS Trackers and Tracking Devices in Saudi Arabia
What is the best GPS tracker for a car in Saudi Arabia?
For most cars the best choice is a wired 4G tracker with a backup battery, fitted out of sight by a technician. It reports continuously, survives a disconnected battery and accepts a cut-off relay. An OBD plug-in suits owners who want a quick fit, and a battery tracker suits trailers and equipment with no power.
Does a car tracker need a SIM card and a subscription?
Yes, if you want to see the vehicle live. The SIM carries position data to the platform, and the subscription covers that data, the platform and alerts. A tracker without a SIM only records positions for later download and cannot alert you. HHET can supply and manage the SIM as part of the service.
Can a GPS tracker stop the engine of a stolen car?
A wired tracker fitted with a relay can prevent the engine from restarting once the vehicle is stationary. HHET configures the cut-off so it does not act while the vehicle is moving, and restricts the command to named users with every use logged. It is a recovery tool used together with live location and the police.
How long does it take to install a car tracking device?
A standard wired tracker on a car is usually fitted, tested and activated in under an hour. An OBD plug-in takes minutes. Add-ons such as a cut-off relay, fuel sensor or cameras extend the job, and trucks take longer than cars. HHET installs at its Jeddah workshop or at your site.
Are HHET trackers approved by the TGA for WASL linking?
Where your activity requires WASL linking, HHET supplies devices from the TGA-approved range and completes the linking as part of installation. Taxi, car rental, bus and freight are among the licensed activities covered. We confirm the current TGA requirement for your activity before quoting, because requirements can change.
Will a GPS tracker drain my car battery?
Not in normal use. A wired tracker draws a very small current when the vehicle is parked, far less than the vehicle's own electronics, and switches to a low-power sleep mode between reports. A vehicle left unused for many weeks should be checked regardless of whether it has a tracker fitted.
Can I move a tracker to another vehicle?
Yes. An OBD tracker moves in seconds. A wired tracker can be taken out and refitted by a technician, and the platform record is updated to the new vehicle. For vehicles linked to WASL, the linking must also be updated with the new vehicle details, which HHET handles with the refit.
Fleet Management System for Saudi Fleets
What is the difference between fleet tracking and a fleet management system?
Fleet tracking shows where vehicles are and where they have been. A fleet management system adds the tools to run the fleet: geofences, alerts, driver scores, fuel and maintenance reports, user roles and scheduled reporting. HHET's platform does both, using the same tracking devices in each vehicle.
Does the HHET fleet management system work for mixed fleets?
Yes. Cars, vans, pickups, trucks, buses, trailers and machines can all appear on one map, grouped by branch or department with separate alert rules and reports. Each group can have its own users, so a regional manager sees only that region while head office sees the whole fleet.
Can the system report to the TGA WASL platform?
For vehicles in licensed transport activities, HHET supplies devices from the TGA-approved range and completes the WASL linking so their data is forwarded as the Transport General Authority requires. The platform's device-health view then shows which vehicles have stopped reporting, so compliance is maintained as the fleet changes.
How much does a fleet management system cost in Saudi Arabia?
The cost is a per-vehicle monthly subscription plus hardware and installation. It depends on device type, added sensors such as fuel or temperature, reporting interval and contract term, with lower rates for larger fleets. HHET quotes per fleet after a short vehicle survey rather than from a fixed price list.
Truck Tracking System in Saudi Arabia
What is the best GPS tracking device for trucks in Saudi Arabia?
A wired tracker rated for 9–36 V with a backup battery, offline buffering and inputs for driver ID and fuel sensors, installed away from cab heat and dust. For licensed freight operators it must also be a TGA-approved model that reports to WASL. HHET selects the model per fleet from devices that meet these requirements.
Does truck tracking work on the Jeddah–Riyadh highway with signal gaps?
Yes. Mobile coverage is good for most of Route 40, and where it drops the device stores positions in memory and uploads them when the signal returns, so trip history shows the full route and stops. Live view resumes as soon as the truck is back in coverage.
Can the system tell me which trailer is behind which truck?
With a battery tracker on each trailer, the HHET platform pairs it to the truck whose tracker is moving alongside it and records the pairing per trip. If a trailer is detached away from a depot or moves on its own, an alert is raised. This is optional hardware added to the truck system.
Do trucks need to be linked to WASL?
Operators licensed by the Transport General Authority for freight transport are typically required to fit approved tracking devices linked to the WASL platform. Requirements depend on licence type and change over time. HHET supplies devices from the TGA-approved range, completes the linking and confirms the current rules for your activity before quoting.
TGA-Approved Vehicle Tracking and WASL Integration
What is WASL and who has to link to it?
WASL is the Transport General Authority's platform for receiving tracking data from vehicles in licensed transport activities, such as taxi, car rental, buses and freight. Operators in those activities are typically required to fit approved devices and link each vehicle to WASL. Private company fleets outside TGA licensing are normally not required to.
Does HHET supply TGA-approved tracking devices?
Where your activity requires it, HHET supplies devices from the TGA-approved range that meet the TGA's technical specifications for WASL reporting, installs them in 12 V cars and 24 V buses and trucks, and completes the WASL linking for each vehicle. We confirm the current approved requirements for your activity before quoting, since specifications are updated over time.
How long does WASL linking take for a fleet?
Installation is typically under an hour per car and longer for buses and trucks; the linking itself depends on the completeness of your vehicle and licence details and on the TGA platform's processing. HHET works from your vehicle list in batches and confirms the feed is received for each vehicle before handover.
What happens if a linked vehicle stops reporting?
A vehicle that stops reporting can be treated as non-compliant, so HHET's platform flags any device that misses its expected interval and our support team investigates the cause, usually SIM, power or antenna, and repairs or replaces the unit. Keeping the fleet reporting is part of the service, not an extra.
Can I use my existing trackers for WASL?
Only if the device model and its provider meet the TGA's current specifications and the provider can forward data to WASL. Many consumer-grade trackers cannot. HHET will check your existing hardware; where it does not qualify, we replace it with an approved device and reuse the installation points where practical.
Car GPS Tracker Installation Service
How long does it take to install a GPS tracker in a car?
A standard wired tracker is usually fitted, tested and activated in under an hour. An OBD plug-in takes minutes. A cut-off relay adds a little time, a truck fuel sensor can take several hours because of calibration, and camera systems are closer to a half-day. We confirm the expected time when we quote.
Can you install trackers at our premises outside Jeddah?
Yes, by arrangement. Makkah, Taif and King Abdullah Economic City are within a day's reach of our Jeddah team. For Riyadh, Dammam and other regions we typically plan visits around batches of vehicles so travel does not add much to the cost. Tell us where the vehicles are and we will propose a schedule.
Will the installation affect my vehicle's wiring or warranty?
A correctly fitted tracker draws power through its own fused connection and does not alter the vehicle's systems. Our technicians use the manufacturer's wiring diagram, avoid cutting into factory harnesses where a tap is possible, and test before refitting trims. If you have a specific dealer warranty concern, tell us and we will choose the connection method accordingly.
Do you link the device to WASL during installation?
Yes, where your transport activity requires it. The technician fits an approved device, and our platform team completes the link on the TGA's WASL platform using the vehicle and operator details, then confirms it is reporting before the job is closed. Bring the vehicle registration and your operator details to the appointment.
Anti-Theft GPS Tracker with Engine Cut-Off
Can a GPS tracker stop a car engine remotely?
Yes, when it is fitted with a relay on the starter or fuel-pump supply. An authorised user sends the command from the HHET platform and the engine will not restart until the command is reversed. The relay is fitted and tested by an HHET technician as part of the installation.
Is it safe to cut the engine while the car is moving?
No, and HHET does not configure systems to do it. Our cut-off logic acts only when the vehicle is stationary or below a walking pace; a command sent while the vehicle is moving is held and executed the next time it stops. The aim is to prevent a restart, not to stop a vehicle in traffic.
Will the tracker still work if the thief disconnects the battery?
Yes, for a period. Wired trackers carry an internal backup battery and switch to it when the vehicle supply is cut, reporting the power-cut event at the same time. How long it lasts depends on the model and the reporting interval. A second battery tracker fixed elsewhere on the vehicle extends this further.
Who is allowed to trigger the engine cut-off, and is it logged?
Only users you name in writing, each with their own login and a confirmation step before the command is sent. Every use is logged on the platform with the user, the time and the vehicle's position. We recommend limiting it to one or two people and agreeing in advance when it may be used.
Fleet Fuel Monitoring System
How accurate is a GPS fuel sensor?
A properly calibrated capacitive rod sensor reads the tank level closely enough to show refuels, drains and consumption per trip reliably, and the platform filters slosh and slope effects. Accuracy depends on calibration steps and tank shape; irregular truck tanks need more calibration points. CAN-bus reads depend on the vehicle's own data resolution.
Can fuel monitoring tell me if fuel is being stolen?
Yes. A sharp fall in level while the vehicle is parked with the ignition off is flagged as a drain, with the time, location and estimated litres, and sent to the fleet manager within minutes. Short filling shows as a refuel event smaller than the fuel-card receipt. Both appear in the fuel report.
Does fitting a fuel sensor require drilling the tank?
A capacitive rod sensor does, through the tank top, and it gives the most accurate readings. An ultrasonic sensor is bonded under the tank without drilling, and a CAN-bus or OBD reader uses the vehicle's own data with no tank work at all. HHET recommends the sensor per vehicle after a survey.
How much does a fleet fuel monitoring system cost?
It depends on the sensor type, the number of tanks per vehicle, whether a tracker is already fitted, fleet size and subscription term. A CAN reader on a van is a different job from a calibrated rod in each of a truck's two tanks, so HHET quotes per fleet rather than from a list price.
Driver Behaviour Monitoring System
What does driver behavior monitoring track?
It tracks speeding against limits you set, harsh braking, harsh acceleration, harsh cornering, idling and out-of-hours use. Each event is stamped with time, place and driver, then weighted into a score per 100 km. Managers can open any event and replay it on the map before speaking to the driver.
How does the system know which driver is at the wheel?
Drivers identify themselves with an RFID card, an iButton key or a PIN at the start of a shift, so events attach to a named person rather than the vehicle. Fleets that prefer not to use keys can assign drivers to vehicles by roster in the platform instead.
Do I need a camera for driver monitoring?
No. Speed, braking, cornering and idling are detected from GPS and the tracker's built-in accelerometer. A camera only adds video evidence of what happened around an event. If you want one, HHET offers dash cam telematics as a separate layer with driver consent and clear internal rules.
Will drivers accept being monitored?
Acceptance is much higher when drivers are told in advance what is measured, who sees it and how it is used, and when scores lead to coaching and recognition rather than only penalties. Putting this in the driver's written terms and sharing the weekly league table keeps the system fair and visible.
Can the alerts warn a driver in the cab?
On tracker models that support it, a short in-cab buzzer sounds when speed passes your limit, which corrects the habit at the moment it happens. Supervisors can receive the same event by push notification, SMS or email. HHET confirms buzzer support for your devices before quoting.
Bus and School Transport Tracking
What does a GPS tracker for a bus show the operator?
It shows live position, speed, the time of arrival and departure at each stop, route deviations and driver events such as harsh braking. A dispatcher sees which buses are late or off route on one map, and can replay any trip afterwards to settle a complaint with the actual timings.
Does bus tracking follow individual passengers?
No. It tracks the operator's vehicle, route and schedule. Notifications are sent by the company when a bus approaches, reaches or leaves a stop. Boarding lists, attendance and student records remain in the school's own systems, and HHET's platform does not hold passenger data.
Do school and staff buses need WASL linking?
Buses operating under a licence from the Transport General Authority are typically required to link their tracker to the WASL platform, but the rules differ by activity and change over time. Confirm the current requirement with TGA, and ask HHET to confirm WASL approval for the device model before buying.
Can the system alert me if a bus is late or off route?
Yes. Each stop is a geofence with an expected time, so the platform flags a bus that is more than a set number of minutes late, skips a stop or leaves its route corridor. Alerts go to the dispatcher by push notification, SMS or email, with the bus position on the map.
Taxi and Car Rental Tracking
Can rental companies in Saudi Arabia track cars after they are rented?
Yes. A company can track its own vehicles during a rental to enforce the contract, as long as the contract tells the customer that tracking is fitted and explains what is recorded. HHET recommends a clear clause in the rental agreement, and the platform shows trips only for the rental period.
Do taxi and car rental vehicles need WASL linking?
Taxi and rental activities licensed by the Transport General Authority are typically required to link each vehicle's tracker to the WASL platform. Rules vary by activity and licence and change over time, so confirm the current requirement with TGA, and ask HHET to confirm the WASL approval status of the device model.
How does a geofence help with a rental contract?
A geofence draws the permitted territory, such as a city or province, on the map. When the car crosses the boundary, the platform sends an alert with the position, so the company can call the customer immediately. Separate zones can be set around borders, ports or areas the contract prohibits.
Is it safe to stop a rental car remotely?
It is safe when the relay is wired as a fail-safe and the platform only accepts the command below a set speed, so the car is never stopped on the highway. Each cut-off is logged with user and time. The decision and contract basis stay with the company.
What is the difference between hardwired and OBD trackers for rental cars?
A hardwired tracker is concealed behind the dashboard and connected to the battery and ignition, so it resists tampering and supports engine cut-off. An OBD plug-in fits in minutes but can be unplugged, so it needs a removal alert. Hardwired suits core rental fleets; OBD suits short-term or rotating vehicles.
Trailer and Container Tracking
How long does a battery GPS tracker last on a trailer?
Battery life ranges from several months to a few years, depending on the battery size, how often it reports and the temperature. Reporting a few times a day while parked lasts far longer than a position every minute. Solar-assisted units recharge in the sun and can run indefinitely at normal reporting rates.
Can a GPS tracker work inside a steel container?
Not reliably. A steel box blocks satellite and mobile signals, so HHET mounts the tracker on the outside, such as on the door frame or a recessed corner, or on the chassis carrying the box. Door sensors can be added where the unit supports them, to alert on doors opened outside a geofence.
How does the platform know which trailer is behind which truck?
Pairing is either automatic, through a wired connection or an RFID tag at the fifth wheel that reports the trailer ID to the tractor's tracker, or inferred when both devices move together from the same point. The trip report then follows the trailer, even when several tractors haul it.
Will I get an alert if a trailer is stolen from a yard?
Yes. A motion sensor wakes the tracker when the trailer moves, and the platform alerts you if there is no paired tractor of yours or the trailer leaves its yard geofence. The alert carries the position and a trail so you can start recovery and report to the police quickly.
Heavy Equipment and Asset Tracking
How does a tracker count engine hours on a machine with no ignition?
It uses another signal: the alternator output showing the machine is charging, a fuel-run or output wire, or vibration sensed by the device itself. HHET chooses the method for each machine during the survey, and the platform converts the count into hours and a utilisation percentage.
Can I track equipment that has no power supply?
Yes. A battery-powered tracker sleeps most of the time, wakes on motion or on a schedule, and reports a few times a day. Battery life depends on the reporting interval and the temperature. Solar-assisted models keep the battery topped up for assets that sit in open yards.
What happens if someone moves equipment at night?
The platform checks every movement against the site geofence and your working-hours schedule. Movement outside the fence or outside hours is raised as a high-priority alert, with position and trail, to the people you name. That is usually the first warning of a lowbed taking a machine off site.
Is asset tracking different from vehicle tracking?
Yes. Equipment often has no ignition, may sit idle for weeks and is measured in engine hours, not kilometres. Reports focus on utilisation, site presence and unauthorised movement, not speed or driver behaviour. Both live on the same HHET platform, so vehicles and assets show on one map.
Motorcycle and Delivery Bike Tracking
Can a GPS tracker be hidden on a motorcycle?
Yes. Compact trackers fit under the seat, inside a side fairing or behind the headlight shell, away from the engine and exhaust heat. The antenna needs a clear sky view through plastic or fibreglass. HHET technicians choose the position for each model and record it so the unit can be found for service later.
Will a tracker drain my motorcycle battery?
A wired tracker draws very little current, far less than the bike's lights or horn, and enters a low-power sleep mode when the ignition is off. On a healthy battery the effect is negligible. If a bike sits unused for weeks, a battery tracker or a periodic ride avoids any risk of a flat battery.
Is the tracker waterproof enough for rain and washing?
Motorcycle trackers are sealed units, typically rated IP65 or IP67, which covers rain, road spray and normal washing. They are fitted away from direct jets, with connectors protected and the lead routed so water cannot run down into the plug. We confirm the exact rating of the unit we propose before ordering.
Can I see which rider took the bike home at night?
Yes. The platform stores every trip with start and end time, location and distance, and you can set a schedule alert for movement outside shift hours. If riders are assigned to bikes in the platform, the report shows who was on the bike. Retention periods for history are agreed in your plan.
Do I need a different SIM or plan for motorcycles?
No. Bike trackers use the same type of SIM and platform subscription as car units, and HHET can supply and manage the SIMs in the plan. Because bikes report every few seconds while moving, data use is higher than a parked asset; we size the plan to your reporting interval.
OBD GPS Trackers
Does an OBD GPS tracker work on every car?
It works on cars and light vans with a standard 16-pin OBD-II port, which covers most petrol cars built since around 2001 and most diesels since the mid-2000s. Signal and data quality vary by model, so HHET checks the make, model and year first. Trucks and buses use different connectors and need wired units.
Can a thief or driver simply unplug the tracker?
Yes, an OBD tracker can be unplugged, and that is its main weakness. The platform sends an alert when power is lost, and a retaining clip slows removal, but it will not stop a determined person. For theft protection on valuable vehicles, a hidden wired tracker is the stronger choice.
Will it drain my car battery?
A well-designed unit sleeps when the engine is off and draws very little current, so a healthy battery is unaffected over normal use. A car left for several weeks, or one with an old battery, is at more risk. HHET checks the sleep current of the unit and recommends a wired alternative if needed.
What engine data can the tracker report?
Typically ignition, speed, engine RPM, coolant temperature, battery voltage and diagnostic fault codes, depending on the vehicle and the tracker model. Some newer cars restrict data from third-party devices and return only position. HHET confirms what a given vehicle will report before you buy a fleet's worth of units.
Can I move an OBD tracker to another car?
Yes. Unplug it and plug it into the next car, then reassign the unit to the new vehicle in the HHET platform so history and reports follow the right car. This is why OBD suits pool vehicles, short leases and sales cars that rotate between staff.
Magnetic, Hidden and Small GPS Trackers
How long does a magnetic GPS tracker battery last?
It depends on the reporting interval and battery size. A unit reporting once or twice a day can run for months, one reporting every ten to thirty minutes for weeks, and one reporting every minute for days. Heat and cold reduce life. The platform shows battery level and alerts you before it runs out.
Will a magnetic tracker stay on in summer heat and on rough roads?
A strong magnet on clean steel normally holds, but vibration over speed bumps and corrugated roads can shake it loose, so add a cable-tie or bracket. Heat is the bigger risk to the battery. Mount away from exhaust and brake parts, and choose a unit rated for high operating temperatures.
Can I use a hidden tracker on a car I do not own?
No. HHET supplies magnetic and compact trackers only for vehicles and assets that you own or operate, with drivers and employees informed. Tracking another person without their knowledge can breach Saudi privacy and data protection rules. Use trackers to protect your own fleet and equipment.
Does a battery tracker replace a wired one?
For most vehicles, no. A wired tracker reports continuously, never needs charging and supports sensors and relays. A battery tracker is the right primary choice for trailers, containers and equipment with no power, and the right second layer on vehicles that already have a wired unit.
GPS Tracker SIM Cards and Subscriptions
Can I use any SIM card in a GPS tracker?
Not any. The SIM must be data-enabled, registered to your company, active on a network with coverage on your routes, and configured with the correct APN. Consumer prepaid cards often fail on IP or port restrictions or expire without notice. HHET supplies pre-configured, tested SIMs.
How much data does a GPS tracker use per month?
Typical vehicle trackers use from a few megabytes to a few tens of megabytes a month, depending on reporting interval and sensors. Trackers that send video or many sensor values use more. HHET sizes the plan to your setup and the platform shows usage per SIM.
What happens when the tracker has no mobile signal?
It keeps recording positions in its memory and uploads them when coverage returns, so the trip history fills in after the gap. You will not see live position while out of coverage. The platform shows the last seen location and time so you know where the signal was lost.
Do I pay for the SIM separately from the platform?
With HHET-managed SIMs the SIM, data and platform access are bundled into one subscription, and the quote lists each part so you can see them. If you supply your own SIMs, you pay the operator for data and HHET for the platform and support.
Is there a tracker that works without a SIM?
Loggers and Bluetooth tags work without a SIM, but neither reports live from a moving vehicle. A logger stores trips for later download, and a tag depends on a nearby phone. Live location, alerts and WASL linking all require a SIM-equipped tracker.
Vehicle Tracking Software and Mobile App
Do I need to install software to use the HHET platform?
No. The platform runs in a web browser on any modern computer, so staff log in with a username and password. Only the mobile app is installed, from your phone's app store. Your administrator creates users and decides which vehicles and reports each person sees.
Can I track my car from my mobile?
Yes. Once a tracker is fitted and active, the HHET app shows the vehicle's live position, trip history for a chosen day and your alerts, so you can check your own vehicle from anywhere with a data connection. The app shows the vehicle tracker's position, not the phone's.
Is the interface available in Arabic?
Yes. The platform and app run in Arabic, with right-to-left layout, and in English, and each user chooses their language. Reports and alerts follow the user's language setting. Some technical field names from specific devices may stay in English, which HHET confirms during onboarding.
Can different people see different vehicles?
Yes. Administrators create users with roles and assign vehicle groups to them, so a regional supervisor sees only their region and a driver or client sees only their own vehicle. Roles also control whether a user can view only, run reports or change alert rules and geofences.
Can the tracking data go into my own system?
Often, yes. Companies that run dispatch or ERP software can ask HHET about integration options for position and event data, sometimes called an AVL feed. The available method and fields depend on your system, so describe it when you request a quote and we will confirm what is possible.
Temperature and Humidity Monitoring System in Saudi Arabia
What is the difference between a data logger and a monitoring system?
A data logger records readings on its own memory and is read later; a monitoring system sends readings to a platform as they happen and alerts people when a limit is crossed. Loggers suit shipments and mapping studies; monitoring systems suit rooms, fridges and vehicles where someone must act in time. Many HHET sites use both.
How often should temperature be recorded?
Often enough to catch an excursion before product is harmed. For most cold rooms and fridges that means every few minutes; for ambient warehouses a longer interval is usual; for vaccine fridges and reefers in transit a short interval is safer. HHET sets the interval per asset to match the product and the regulator's expectations.
Can I receive alerts when I am outside Saudi Arabia?
Yes. The HHET platform and app work from any internet connection, and alerts are sent by app notification, email, SMS and voice call to the contacts you configure. Escalation chains mean that if the first person does not acknowledge an alarm, the next person is notified, wherever they are.
Does HHET monitor humidity as well as temperature?
Yes. Most HHET sensors measure both, and humidity limits can be set per zone alongside temperature. Humidity matters for packaging, electronics, pharmaceuticals with a relative humidity limit on the label, server rooms, and any coastal site where moisture near loading doors swings during the day.
What happens to the record during a power cut or internet outage?
Battery-powered sensors and battery-backed gateways continue recording. The gateway stores readings locally and uploads them when the connection returns, so the record stays continuous. A power-loss alert is sent when the supply drops, so the team knows about the cut before the room has warmed.
Do I need calibration certificates for my sensors?
If a regulator, customer or accreditation body will rely on the records, yes. The SFDA expects calibrated devices for medicines; HACCP auditors and hospital accreditation schemes generally expect the same. HHET supplies sensors with traceable certificates where required and schedules recalibration so none expire unnoticed.
Can one platform cover sites in Jeddah, Riyadh and Dammam?
Yes. The HHET platform organises sensors by site, building and room, and users see the sites their role allows. A quality team in one city can monitor cold rooms, fridges and vehicles across the Kingdom from one screen, with reports produced per site or combined.
Cold Chain Monitoring System
What is a cold chain monitoring system?
A cold chain monitoring system records temperature, and often humidity, at every stage a chilled or frozen product passes through, from the supplier's cold store to the customer's receiving point, and alerts when a stage leaves range. HHET combines fixed sensors, portable loggers and vehicle units on one platform so the whole chain reads as one record.
Do I need sensors in the truck if I already use data loggers?
Loggers give you the record; truck sensors give you the alert. A logger tells you after arrival that the load warmed; a connected reefer unit tells the dispatcher while it is happening, when the driver can still act. Many HHET customers use loggers for third-party legs and connected units on their own vehicles.
How does cold chain monitoring help with SFDA expectations?
The SFDA expects medicines to be kept within their labelled range in storage and transport, and expects records that show it. Continuous monitoring in rooms and vehicles, calibrated devices and per-shipment reports produce that evidence automatically. HHET confirms current SFDA guidance for your activity before specifying a system.
What does a cold chain monitoring system cost?
HHET does not publish list prices because no two networks are alike. The cost drivers are the number of fixed monitoring points, the number of vehicles fitted, whether portable loggers are needed, calibration and documentation requirements, and the platform subscription. A quotation follows a short description of your stores, vehicles and products.
Cold Room Temperature Monitoring System
Where should the temperature sensor be placed in a cold room?
At the point where product is at risk first, which is usually the warmest point: high, away from the evaporator and near the door. A second sensor near the return air shows what the plant is doing. In freezers the electronics stay outside and only the probe enters. HHET confirms the warmest point by mapping before fixing sensors.
How quickly will I be alerted if a cold room fails?
Alerts are sent when a reading stays outside its limit for longer than a delay set for that room, typically a few minutes, so routine door openings do not alarm but a failure does. Notification is by app, SMS and voice call, escalating to the next person on the list if the first does not acknowledge.
Does the system keep working during a power cut?
Yes. Sensors are battery-powered and the gateway is battery-backed, so recording continues and a power-loss alert is sent as soon as supply drops. If connectivity also fails, readings are stored locally and uploaded when the link returns, so there is no gap in the record for the inspector to question.
Can one system monitor both cold rooms and pharmacy fridges?
Yes. Each unit has its own sensor type, limits and alarm rules on the same HHET platform. A pharmacy fridge uses a buffered probe, a 2 °C to 8 °C range and escalation to the pharmacist; a frozen store uses a low-temperature probe with limits tuned to its defrost cycles. One screen covers both.
Warehouse Temperature and Humidity Monitoring System
How many temperature sensors does a warehouse need?
There is no fixed number. The count comes from a mapping study, which shows where the warm, cold, humid and dry points are, together with the sensitivity of what you store and any regulatory expectations. HHET places permanent sensors at the points the study identifies rather than at convenient wall positions.
What is temperature mapping and do I need it?
Mapping is a documented study using a grid of calibrated loggers to find the hot and cold points in a storage area over a representative period. Pharmaceutical warehouses working under the SFDA are expected to have one; for other warehouses it is the practical way to know your sensors are watching the right places.
Why does humidity matter in a warehouse?
High humidity weakens cartons, encourages corrosion and condensation on electronics, and may breach the labelled limit on pharmaceutical products. Coastal cities such as Jeddah and Dammam see large daily swings near loading doors. Combined temperature and humidity sensors record both from the same monitoring point at no extra effort.
Can the system cover cold rooms inside the warehouse as well?
Yes. Chillers, freezers and ambient zones are monitored on the same HHET platform with their own limits and alarm rules, so one screen and one report cover the whole building. The specifics of chilled and frozen rooms are described on the cold room temperature monitoring page.
Pharmacy, Pharma and Vaccine Storage Monitoring
What temperature monitoring devices are used for vaccines?
Wireless temperature sensors with a probe inside the fridge, preferably in a buffered holder so it reads product temperature rather than air. They report to a platform that stores every reading and sends alerts. Many vaccines are labelled for 2 to 8 °C, but always follow the product label.
Is a digital thermometer enough for a pharmacy fridge?
Usually not. A thermometer shows the temperature only when someone reads it, and tells you nothing about overnight or weekend failures. Continuous monitoring records every reading, alerts a named person during an excursion and keeps the history needed to decide whether stock is still usable.
What happens to the readings if the power or Wi-Fi fails?
HHET specifies sensors with their own battery that store readings while offline and upload the gap on reconnection, so the record stays continuous. A mains-loss alert warns you before temperature drifts, and a cellular uplink can be used where Wi-Fi is unreliable.
Can one system cover the pharmacy and the warehouse?
Yes. Fridge probes, room sensors and warehouse sensors report to the same HHET platform, each with its own alarm limits and escalation list. You can view or export the record per unit, per site or for a chosen period, which keeps quality files consistent.
Are HHET sensors SFDA approved?
HHET does not describe any sensor as SFDA approved, because the SFDA assesses establishments and their practices rather than devices. HHET confirms current SFDA guidance for your activity before quoting and specifies sensors to produce continuous, traceable records. Ask for the current position in writing.
Hospital and Laboratory Monitoring
How do you monitor a -80 °C freezer?
With a probe rated for ultra-low temperatures, with the radio and battery kept outside the freezer. The thin probe lead passes through the door gasket or an access port so the seal is not compromised. The platform alerts on rising temperature and on power loss.
Can one system cover a hospital's blood bank, pharmacy and labs?
Yes. Each unit gets its own sensor with limits set by its owner, and all report to one platform. Alert contacts differ by unit, so the blood bank, pharmacy and lab each receive the alarms that concern them, while a quality officer sees the whole building.
Can sensors measure incubator humidity as well as temperature?
Yes, with a temperature and humidity sensor suited to a warm, humid chamber. It is usually placed independently of the incubator's own display, so a drift between the two readings shows up early. Confirm the sensor's rated humidity range before purchase. Sensors keep their own log if the link drops.
Who gets called at night if a fridge fails?
Whoever you define. A typical chain notifies the on-call technician first, escalates to a second person if there is no acknowledgement within a set time, then to the supervisor. All responses are logged with names and times for later review. The chain can differ by unit and by shift.
Does this help with laboratory accreditation?
It supplies records that accreditation programmes typically ask for: continuous readings, alarm logs and calibration details. Accreditation itself depends on your procedures and the body concerned, so HHET does not promise outcomes. Confirm current requirements with CBAHI or your accreditation body. Your quality team still owns the procedures.
SFDA-Compliant Temperature Monitoring
Does the SFDA require continuous temperature monitoring?
The SFDA's GSDP-based expectations for medicine storage and distribution include monitoring conditions with calibrated devices and keeping records that show the product stayed within its labelled range. Continuous automatic recording is the practical way to meet that intent; periodic manual readings cannot show what happened between them. HHET confirms the current requirement for your activity before quoting.
Are HHET sensors "SFDA approved"?
No supplier should describe a sensor that way. The SFDA assesses establishments and their practices; a monitoring system is one part of what it reviews. HHET supplies calibrated, documented sensors and loggers, mapping studies and records designed to support an inspection, and confirms current SFDA guidance before specifying a system.
How often must monitoring sensors be calibrated?
Calibration intervals are set by your quality system and the manufacturer's guidance, commonly once a year. The practical requirement is that every sensor in the record carries a certificate valid for the period being inspected. HHET tracks certificate expiry on the platform and offers recalibration or sensor exchange before a certificate lapses.
Does temperature mapping need to be repeated?
Mapping is generally repeated after any change to racking, plant or layout, and many Saudi facilities repeat it across seasons because summer and winter conditions differ so much. Continuous monitoring between studies shows if a zone begins to drift before the next formal mapping is due.
What records should I be able to show an inspector?
Typically the continuous temperature and humidity record for each storage area, calibration certificates for every sensor, the mapping study, the alarm and excursion log with documented assessments, and transport records for products moved. The HHET platform exports these as PDF or spreadsheet for any date range you are asked about.
Food and HACCP Temperature Monitoring
What is HACCP temperature monitoring?
It is the measurement and recording of temperatures at the points in food handling where a hazard can be controlled, such as cold storage, cooking, hot holding and cooling. Continuous sensors handle the fixed points automatically, and every reading is kept as evidence.
What temperature should a restaurant fridge and freezer be?
Commonly, chilled food is held at or below about 5 °C and frozen food at -18 °C or colder, but your HACCP plan and the rules for your activity set the limit. HHET configures alerts to the limits in your plan, not a default.
Can the system replace paper temperature logs?
It replaces manual recording with a continuous electronic log, timestamped and stored with the vehicle and location, plus corrective-action entries for excursions. Your quality manager decides whether it meets your HACCP plan and the audit requirements of your customers, and HHET provides the report format they need.
What if the sensor loses Wi-Fi in the kitchen?
The sensor stores readings in its own memory and sends them when the connection returns, so the log stays continuous. For steel cold rooms, the gateway can be placed outside with an external antenna, or a cellular uplink used. Nothing is lost during the outage.
Can it cover a central kitchen and several outlets?
Yes. All sites report to one platform, each with its own limits and alert contacts, and you can see every unit on one dashboard or pull a report per outlet. Delivery vehicles and portable boxes can be added to the same record. Alarm limits can differ per site.
Server Room Temperature and Humidity Monitoring
What is the best way to monitor a server room's temperature and humidity?
Fit temperature sensors at rack intakes and tops, a humidity sensor in the room, and add water and door sensors. Connect them to a platform that stores readings and alerts IT on call by SMS or app. Place sensors where equipment draws air, not by the door.
What temperature should a server room be kept at?
Follow your equipment manufacturer's specification first. Published guidance for data centres commonly recommends an intake range around 18 to 27 °C, and many small rooms are held near 22 to 24 °C. Set alerts a few degrees below the point where hardware throttles.
Can the monitor still alert us if power or the network is down?
Yes, if specified for it. HHET gateways can include battery backup and a cellular uplink, so an alert about mains loss or rising temperature still reaches you when the building network is down. Sensors keep storing readings and upload any gap later. Test the alert path after installation.
Why monitor water and door status in a server room?
Water from a leaking pipe or air-conditioner drain can destroy equipment quickly, and nobody sees it under a raised floor. A door contact shows unplanned entry or a door left open that lets the cooled air escape. Both are inexpensive sensors with serious payoff.
Can one system monitor several server or comms rooms?
Yes. Each room reports to the same HHET platform, with its own limits and contacts, and you see all rooms on one dashboard. Branch comms cabinets can be added without a new system, which helps multi-site organisations. Alarm limits can differ per room.
Temperature and Humidity Data Loggers
What is the difference between a data logger and a sensor?
A sensor measures; a logger measures and stores. A fixed wireless sensor sends each reading to a platform immediately, while a logger keeps readings in its own memory to be read later, or uploads them when it is connected. Loggers travel with product; sensors stay in rooms, fridges and vehicles.
Can a data logger send alerts?
A standalone USB logger cannot; it reports on arrival. A connected logger with a cellular or gateway link uploads as it records, and the HHET platform alerts when a reading crosses its limit. Choose connected models where someone must act during the journey, and standalone models where the record alone is enough.
How long does a data logger battery last?
It depends on the recording and transmission interval and on temperature. Standalone loggers at normal intervals typically run for months to years; cellular loggers for weeks to months. Cold reduces capacity. The HHET platform shows battery state for connected loggers so they are replaced before they fail.
Do data loggers need calibration certificates?
If the record will be relied on by a regulator, customer or auditor, yes. The SFDA expects calibrated devices for medicines, and HACCP auditors generally expect the same. HHET supplies loggers with traceable certificates where needed, tracks their expiry on the platform and arranges recalibration or replacement.
Temperature and Humidity Sensors
What is the difference between a temperature sensor and a data logger?
A sensor measures and usually transmits live readings to a platform. A data logger records readings in its own memory, which you download later, though many do both. Choose by whether you need live alerts or a stored record for later review.
How accurate is a temperature and humidity sensor?
It depends on the model; the data sheet states accuracy as plus or minus a figure over a range. Temperature is typically easier to measure precisely than humidity, which is less accurate at the extremes and drifts over time. Always check the range the quoted figure applies to.
How often should sensors be calibrated?
Commonly once a year for regulated storage such as pharmaceuticals and laboratories, but the interval is set by your quality system and the sensor's drift. Food and warehouse sites often follow a similar schedule as good practice. HHET confirms the requirement per application.
Can the same sensor work in a freezer and a warehouse?
Not always. Freezers need a probe and battery rated for low temperatures, while warehouses mainly need coverage and sensible placement. Specify the lowest and highest temperature and humidity the sensor will meet, and choose the model for that range. Ask the supplier to confirm the range in writing.
How is sensor pricing worked out?
Price depends on sensor type and range, number of points, gateways, installation, calibration certificates and the platform plan. HHET quotes after hearing what you want to monitor and where. Compare quotes on accuracy, outage behaviour and recurring costs, not on unit price alone.
IoT and Wireless Temperature Monitoring
What is the difference between LoRa and Wi-Fi temperature sensors?
LoRa sensors send short messages to a nearby gateway over a long-range, low-power radio, so one gateway can serve many battery sensors across a building. Wi-Fi sensors join your own network and need no gateway, but depend on that network and power. HHET picks per site after a survey.
How long does an IoT temperature sensor battery last?
It depends on the reporting interval, the radio and the temperature it works in. Frequent reporting and freezer conditions shorten life; slow reporting extends it. Typically the range is many months to a few years. The HHET platform shows each sensor's battery level so replacement is planned, not a surprise.
What happens to readings if the internet or power fails?
Sensors keep measuring and store readings in memory, then send the backlog when the link returns, so the record has no gap. A gateway with its own battery and cellular uplink keeps reporting through a building power cut, and the HHET platform alerts on loss of power or loss of contact with a sensor.
Can one platform monitor several branches and vehicles?
Yes. Sensors and gateways at any number of sites report into one HHET account, with permissions per site or branch. Refrigerated vehicles fitted with HHET units appear on the same platform, so a customer in Saudi Arabia can see storage and transport records together in one place.
Do wireless sensors work inside insulated cold rooms?
Insulated metal-skinned panels block radio, so HHET usually places the radio outside the room and runs a probe through a sealed port, or tests the position before fixing it. A short survey shows where the signal reaches, and a repeater is added where it does not.
Refrigerated Truck Monitoring: GPS and Temperature Together
What is a GPS temperature monitoring device?
A unit fitted to a refrigerated vehicle that reports its position and the temperature inside the cargo body, together with door state and often reefer set-point, to one platform. HHET fits them so dispatchers see where a truck is and how cold its load is on the same map, with alerts in transit and per-delivery reports.
Can it work with my existing reefer units?
In most cases yes. Temperature probes and door sensors fit any body regardless of the refrigeration unit. Reading set-point and status directly from the reefer controller depends on the make and model; where it is not available, the dispatcher enters the required range per trip and the platform alerts against it.
What alerts does the dispatcher receive in transit?
Cargo temperature outside its range for longer than a set delay, actual temperature drifting from set-point, doors open away from a delivery location or for too long, the reefer unit off with cargo loaded, and loss of power to the monitoring unit. Alerts go by app and SMS and escalate if nobody acknowledges them.
Does the record meet SFDA transport expectations?
The platform produces a continuous cargo-temperature record per journey with times, locations and door events, from calibrated probes where required, which is the evidence GSDP-based expectations call for. HHET confirms current SFDA guidance for your licence and products before specifying the installation, and never describes a device as SFDA approved.
Can trailers that swap between trucks be monitored?
Yes. A trailer is fitted with its own monitoring unit and battery so the temperature and door record stays with the body whichever truck pulls it. The HHET platform shows which truck is coupled to the trailer and combines the two records for the trip and the delivery report.
Fleet Tracking for Logistics and Transport Companies
Do all logistics trucks in Saudi Arabia need WASL tracking?
Not necessarily every vehicle. Requirements depend on the licensed activity and vehicle class set by the Transport General Authority. HHET checks the current rule against your licence before specifying devices and confirms integration status for each vehicle, instead of assuming one blanket answer for the whole fleet.
Can I track trailers that move between different trucks?
Yes. A battery-powered unit on the trailer reports its own position, movement and door state, so the record stays with the trailer whichever tractor pulls it. The HHET platform links the trailer to the truck for each trip, so dwell time and routes are traceable per trailer.
How does tracking reduce fuel cost in a trucking fleet?
It shows idling per truck and per stop, speed events, route deviation and, with a fuel sensor, level changes at unscheduled stops. Dispatchers compare similar trucks on the same route and act on the difference. HHET does not promise a fixed saving; the data sets realistic targets for your routes.
Can customers see where their load is?
Yes. The platform can share a tracking link or send scheduled reports, so a shipper sees progress and expected arrival without phoning dispatch. Geofences at customer sites create the arrival and departure times that support proof of delivery and answer detention or late-delivery claims.
Can one account cover depots in Jeddah, Riyadh and Dammam?
Yes. Vehicles from all depots appear in one HHET account, grouped by depot or branch, with permissions so each depot manager sees their own trucks while head office sees the whole fleet. Consolidated reports compare depots on idling, fuel and trips completed over the same period.
GPS and Temperature Monitoring for Pharmaceutical Distributo
Does SFDA require temperature monitoring during drug transport?
SFDA expectations for medicine distribution, generally aligned with Good Storage and Distribution Practice, call for controlled and recorded conditions in transit. The exact requirement depends on your licence and the product. HHET confirms current guidance for your establishment before specifying the system and never calls a device SFDA approved.
Can one system monitor vans and the warehouse?
Yes. Vehicle units and warehouse sensors report into the same HHET platform, so transport and storage records sit in one account with the same alert rules and the same report format. Each location keeps its own limits for the products held there.
What happens if a van's temperature goes out of range?
The platform alerts dispatch by app and SMS with the vehicle, compartment, reading and trend. If nobody acknowledges within the set time, it escalates to the responsible pharmacist or quality manager. Every alert and action is logged against the consignment.
What does the audit report for a delivery contain?
Loading time and location, cargo temperature through the journey against its limits, door events with locations, arrival inside the customer geofence and the hand-over temperature. The report exports as PDF or a shared link, and is retained on the HHET platform so it can be produced again at a later audit.
How do I monitor legs carried by a courier without HHET units?
A portable data logger travels with the product and records temperature for the whole leg. On return, the data is read into the HHET platform and joined to the consignment record, so the chain has no gap even where a courier or a third-party carrier holds the vehicle and has no tracking unit.
Tracking and Temperature Monitoring for Food and Catering Di
How do I monitor the temperature of food in a delivery van?
Fit a probe in the cargo area, a contact on the doors and a tracker that reports both with position to a platform. The dispatcher sees the temperature on a map and gets alerts when it leaves range. HHET installs and configures this for refrigerated vans.
What temperatures should chilled and frozen deliveries stay at?
Limits depend on the product and your HACCP plan. Chilled items are commonly held at roughly 0 to 5 °C and frozen items at -18 °C or lower, but HHET sets alert limits per compartment from the figures you provide and does not choose them for you. Your quality manager owns the plan.
Can the system replace paper temperature logs?
It replaces manual recording with a continuous electronic log, timestamped and stored with the vehicle and location, plus corrective-action entries for excursions. Your quality manager decides whether it meets your HACCP plan and the audit requirements of your customers, and HHET provides the report format they need.
Do I need a sensor in every van?
Every vehicle that carries temperature-controlled product and needs a record should have its own probe and tracker. For subcontractors or occasional vehicles, a portable data logger placed with the load gives a record for that leg, and can be read into the platform on its return to your depot.
Will door sensors cause false alarms at normal drops?
Not if configured properly. HHET sets a delay and a planned door-open time per stop, and openings inside a customer geofence are treated as expected. Alerts fire when a door stays open too long, or opens away from a delivery location, which is exactly when the dispatcher needs to hear about it.
Fleet and Equipment Tracking for Construction Companies
Can I track machines that have no power for a tracker?
Yes. Battery or solar trackers report at longer intervals to conserve power and alert on movement. Machines with an ignition or battery system get wired units that also record engine hours. HHET chooses the device per asset once it has seen your machine list and how each machine is used.
How does engine-hour tracking help a contractor?
It records when each engine is actually on, per day and per site, so you can compare hours against hire invoices, schedule services by hours and see which machines are underused. It replaces hand-read hour meters and operator timesheets with one consistent record you can audit.
Will I be alerted if equipment leaves a site at night?
Yes. HHET sets a working-hours schedule for each site, and movement outside it, or a geofence breach, sends an alert with the live position to the people you nominate. Police recovery then relies on that position and on your equipment and plate details being ready.
Can the system count tipper trips to a quarry?
Yes, using geofences at the quarry and at the site. Each entry and exit is time-stamped, so trips can be counted per truck and checked against weighbridge tickets before a subcontractor is paid. Disputed trips can be reviewed on a map playback.
Can several projects be managed in one account?
Yes. Assets are grouped by project or site, each with its own geofences and managers, while head office sees the whole fleet and consolidated utilisation reports. Moving a machine between projects simply regroups it, with no new setup or new device.
Delivery and E-commerce Fleet Tracking
How can I track bikes, vans and trucks on one platform?
Fit each vehicle with the tracker that suits it, a compact waterproof unit on bikes and hard-wired units on vans and trucks, and register them all on the same HHET platform. Dispatchers then see every vehicle on one map, filter by type or zone, and share the same alert rules and reports.
Can I see why a delivery was late?
Yes. The trip history shows the route, every stop and how long the vehicle stayed at each. You can separate time lost in traffic, time waiting at the hub and time at the customer. That makes late-delivery reviews a matter of reading the trail instead of arguing about it.
Does tracking help reduce accidents among delivery riders?
It helps by making risk visible. Speed alerts by zone, harsh-event reports and shift-hour history let supervisors coach riders before an incident happens. It does not replace training or sensible time windows, but it gives managers evidence to act on rather than guesses.
Do my delivery vehicles need to be linked to WASL?
It depends on your transport licence and vehicle class under the Transport General Authority. Trucks and vans operated under a TGA licence may need linking. Confirm the requirement for your activity with the TGA or your licensed provider; HHET can advise before any installation begins.
Enterprise and Government Fleet Tracking
How do you control who can see which vehicles in a large fleet?
Access is set by role and by group. Each user is attached to a branch of the vehicle hierarchy, such as one region or department, and receives only the permissions their job needs. Auditors can read everything without editing, and contractors can be limited to the vehicles they supply.
Can HHET support government or ministry fleets?
HHET provides tracking, platform configuration and installation for organisations of any size across Saudi Arabia. Government bodies have their own procurement, hosting and data-handling rules, so those requirements should be stated at the start and checked against the proposed set-up before any commitment is made.
How long does a large fleet rollout take?
It depends on the number of vehicles, how many sites they are spread across and how quickly vehicles can be released for installation. We plan in stages: audit, pilot, then regional waves. A pilot on a few sites usually gives a realistic timetable for the rest.
How do you keep vehicles compliant across thousands of units?
Through fleet-wide health reporting. The platform flags vehicles that stop reporting, lose main power or no longer match their asset record, so a missing unit is found within a day. Licence and WASL requirements themselves should be confirmed with the Transport General Authority for each activity.
Do you provide training for drivers and managers?
Yes. Training is delivered by role: administrators, managers, dispatchers and drivers each get a short session on what they see and do. Drivers are told clearly what the system records and why, which reduces resistance and improves the quality of the data.
How to Install a GPS Tracker in a Car (and When to Call a Pr
Can I install a GPS tracker in my car myself?
Yes, if it is an OBD plug-in tracker: push it into the diagnostics port, drive a few minutes and confirm the position in the app. Hard-wired trackers, engine cut-off relays and fleet vehicles that need WASL linking are better installed by a technician, because wiring faults and poor placement are the most common causes of silent trackers.
Where is the OBD port in a car?
In most cars the OBD port is under the dashboard on the driver's side, near the steering column and within reach of the driver's knees. Some models hide it behind a small plastic cover or place it near the centre console. The owner's manual lists the exact position for your vehicle.
Why does my GPS tracker stop reporting when the car is parked?
Usually because the tracker is powered from an ignition-switched circuit instead of a constant 12 V feed, so it loses power when the key is off. A loose terminal or a poor chassis ground causes the same symptom. A correctly wired tracker keeps reporting with the engine off, at a slower interval to protect the battery.
Where to Place a GPS Tracker in a Car
Where is the best place to hide a GPS tracker in a car?
Behind the dashboard top or the instrument cluster surround, with the antenna facing up, is the most reliable position. It has sky view through plastic, stays away from engine heat and needs trim removal to reach. Always test the signal before refitting panels.
Can I put a GPS tracker under the car?
It is not recommended for most cars. The metal body blocks the sky, dust and water get in, and the unit can be knocked off. Under-body mounting suits only sealed, outdoor-rated units for particular cases such as trailers. For cars, keep the tracker inside the cabin.
Does window tint affect a GPS tracker?
It can. Some tint films contain a metallic layer that attenuates GPS and mobile signals. If a tracker near a tinted window reports late or drifts, move it to the dash top under the clear windscreen area or use an external antenna.
Is the OBD port a good place for a tracker?
It is convenient but easy to find and easy to unplug. For checking a car you own, it works fine. If theft recovery is the purpose, a hard-wired unit hidden behind trim is harder for a thief to locate and remove.
GF-07 Mini GPS Tracker: Setup, Limits and Better Options
Does the GF-07 have real GPS?
Often not. Many units sold under the GF-07 name position themselves through the mobile network, reporting the area of the nearest cell tower rather than a satellite fix. Some units include a small GPS receiver and perform better in the open. Test yours by requesting a location while standing next to it and comparing the pin with your actual position.
What SIM card does a GF-07 need?
A micro-SIM with credit for SMS and a little mobile data. Many GF-07 units only connect to 2G networks, so check with your operator that the SIM has 2G service before buying; without it the unit will never find the network. There is no platform subscription because there is no platform, but every location request costs SMS credit.
Can a GF-07 be linked to WASL?
No. The TGA's WASL platform requires approved tracking devices that report continuously to a connected platform, with vehicle and device details registered. A GF-07 has no platform connection and no approved status, so it cannot be used for taxi, rental, bus or freight vehicles that must comply.
TKSTAR GPS Tracker Guide: Setup, Activation and Alternatives
What is a TKSTAR GPS tracker?
TKSTAR is a brand of low-cost, consumer-grade GPS trackers, mostly plug-in, magnetic or wired units for a single vehicle. They report position by app or SMS and are configured with commands sent from a phone. They suit personal use, not fleets.
How do I activate a TKSTAR tracker?
Insert a data-enabled SIM, power the unit, wait for a GPS fix and send the setup SMS commands listed in the manual that ships with your model. Then register the device identifier in the app or portal and confirm a live position with a short test drive.
Why is my TKSTAR tracker not showing a location?
The usual causes are a SIM with no data or wrong APN settings, setup commands not applied, a weak GPS fix because of metal or tint above the antenna, or an expired SIM plan. Test the SIM in a phone and check placement first.
Can I use TKSTAR trackers for a business fleet?
Generally no. They lack fleet roles, scheduled reports and local support, and a vendor app is not normally a route to WASL linking. For work vehicles, use a managed platform with professionally installed trackers, and confirm any TGA requirements for your activity first.
GPS Tracker Prices in Saudi Arabia: What You Actually Pay
Why do GPS tracker prices vary so much in Saudi Arabia?
Because the word covers very different products. A consumer mini tracker with a battery and SMS commands shares nothing with a hard-wired 4G fleet tracker that reports to a platform, supports sensors and can be linked to WASL. Device class, installation, SIM, subscription and sensors each move the total, so compare complete per-vehicle costs rather than device prices.
Is a monthly subscription always required?
Any tracker that shows you its position remotely needs a mobile connection and a service to receive and display the data, and someone pays for both every month. Devices sold with no subscription either lack live location or include a prepaid period that later renews. The subscription covers data, servers, maps, history, alerts, the app and support.
Does WASL linking cost extra?
Typically yes. Linking a vehicle to the Transport General Authority's WASL platform involves registering the vehicle and an approved device, and it is usually priced per vehicle alongside installation. If the device you bought is not on the approved list, it must be replaced first, which is why licensed operators should confirm approval before purchasing hardware.
How GPS Vehicle Tracking Works, Explained Simply
Does a GPS tracker need a SIM card to work?
To show you a vehicle's position remotely, yes. The satellite receiver finds the position without a SIM, but the only way to send that position out of a moving vehicle is over the mobile network, which needs a SIM and a data plan. Devices without a SIM either store positions for later download or only work within Bluetooth range.
How accurate is GPS vehicle tracking?
In the open with a well-placed antenna, a modern receiver places a vehicle within a few metres, enough to tell which side of the road it is on. Accuracy drops between tall buildings, under structures and briefly after power-up. Cell-tower positioning used by some low-cost devices is accurate only to the area, not the street.
What happens to tracking in a tunnel or underground car park?
The receiver loses its satellite fix, so the tracker reports its last known position marked as stale until the vehicle emerges, then reacquires within seconds. If the mobile network was also lost, buffered reports upload when it reconnects, so the history is complete. A vehicle disappearing in open country indicates a power, SIM or antenna problem instead.
Where to Buy a GPS Tracker in Saudi Arabia: Jarir, Haraj or
Where can I buy a GPS tracker in Saudi Arabia?
You can buy from electronics retail stores, from online marketplaces and classifieds, or from a certified installer that supplies, fits and supports the tracker. Retail and marketplaces mostly sell the device alone. An installer sells the whole working system: device, fitting, SIM, platform and support.
Is it safe to buy a GPS tracker from Haraj or other marketplaces?
It carries more risk than buying from a business. The listing may not match the product, the unit may be used or locked to another account, and returns depend on the seller. If you buy this way, confirm the model, SIM needs and platform first.
Does a retail GPS tracker work with WASL?
Usually not. Consumer trackers sold in stores typically report to the brand's own app, which is not a route to WASL linking. If your vehicles operate under a TGA licence, confirm with the TGA or a licensed provider before purchasing.
What should a certified installer provide?
It should provide the device, SIM and data arrangements, technician installation with a platform test, a managed account with alerts and reports, written support and warranty terms, and WASL linking where your activity requires it. Ask for each of these in writing before you pay.
GPS Trackers Without a SIM or Subscription: What They Can an
Can a GPS tracker work without a SIM card?
It can record positions, but it cannot send them to you. A GPS logger without a SIM stores its track in memory until you retrieve the device and download it. Live location, alerts and remote cut-off all require a mobile connection, which means a SIM and a data plan, either managed by the supplier or supplied by you.
Are trackers with no monthly fee really free to run?
Usually the first period is prepaid inside the purchase price and a renewal fee applies afterwards, because the data and platform still cost money every month. Check who operates the platform, what renewal costs and what happens when the term ends. Devices that truly have no fee are tags or loggers with no live location.
Which trackers can be linked to WASL?
Only devices on the Transport General Authority's approved list that report continuously to a connected platform. Bluetooth tags and GPS loggers cannot be linked, and most prepaid consumer trackers are not approved. Licensed taxi, rental, bus and freight operators should confirm a device's approved status before buying it.
