A truck tracking system is a vehicle tracking system specified for heavy vehicles: 24 V power, devices placed where cab heat and road dust cannot reach them, trailer pairing, driver identification and reports built around long trips rather than city errands. HHET supplies, installs and supports GPS tracking devices for trucks from Jeddah for freight, distribution and construction fleets across Saudi Arabia, and for operators whose freight activity is licensed by the Transport General Authority (TGA), the same device carries the WASL reporting.
Why trucks need their own tracking approach
A sedan tracker in a truck is a short-lived experiment. Trucks run on 24 V systems, sit in the sun at loading bays for hours with cabin temperatures far above the outside air, vibrate constantly, and are shared between drivers and trailers. A truck installation therefore uses a device rated for 9 to 36 V with surge protection, an external or carefully positioned antenna so the cab's steel does not block the sky, a backup battery so the unit keeps reporting if the main supply is cut, and wiring routed and sealed against dust. The platform side is different too: trips are measured in hundreds of kilometres, stops are fuel stations, rest areas, ports and weighbridges, and the questions are about delivery time, driver hours and fuel per trip, not about who took the car at the weekend.
The corridors Saudi trucks live on
Most heavy traffic in the Kingdom runs on a handful of routes, and tracking is shaped by them.
- Jeddah–Riyadh (Route 40). Roughly 950 km from Jeddah Islamic Port to the Riyadh distribution hubs, mostly open desert with long gaps between services. Trip reports show actual transit time against plan, every stop and its duration, and speed on the long straights where fatigue sets in.
- Makkah–Madinah (the Haramain corridor). Dense pilgrim traffic in season, strict access rules around the Holy Cities and tight delivery windows for hotels and catering. Geofences around permitted zones and arrival alerts keep deliveries on time without constant phone calls.
- Riyadh–Dammam and the Eastern Province. Industrial freight to and from King Abdulaziz Port and Jubail, with heavy traffic and frequent stops at industrial gates. Dwell-time reports show where hours are lost.
- Port and city work in Jeddah. Container moves between the port, bonded yards and warehouses in the industrial areas, where the useful data is the number of turns per day and the time spent waiting at each gate.
Mobile coverage along these routes is good for most of the distance, and where it drops the device stores positions and uploads them when the signal returns, so the trip history has no gaps.

Heat, dust and long-haul realities
Summer dashboards in Saudi trucks can pass 60 °C. Dust finds every unsealed connector. A device that works in a showroom can fail in its first August on the road. HHET's installers choose locations inside the cab that stay cooler, away from the windscreen and heater ducts, use connectors and loom tape rated for the temperature, and test the GPS fix and mobile signal after the panels are back on. We explain the options for cab, chassis and trailer mounting in the best place to put a GPS tracker on a truck. Long-haul operation also means drivers swap, trucks are away from the yard for days, and a dead device is not noticed until a customer asks where their load is. The HHET platform flags any truck that stops reporting so the fault is chased from the office, not discovered at the weighbridge.
What the system reports for a truck fleet
| Capability | How it works on a truck | Included |
|---|---|---|
| Live location and trip playback | Position, speed and heading every few seconds while moving; full route replay per trip | Yes |
| 24 V installation with backup battery | Device rated for 9–36 V; internal battery keeps reporting if supply is cut | Yes |
| Driver identification | RFID or iButton key assigns each trip to a driver; alert if the truck moves without a key | Optional hardware |
| Trailer pairing | Trailer tracker linked to the truck; detachment alert away from depots | Optional hardware |
| Fuel level and consumption | Capacitive rod or CAN-bus read; refuel, drain and litres per 100 km per trip | Optional sensor |
| Driver behaviour | Speeding by road limit, harsh braking, long idling with air-conditioning | Yes |
| Geofences and route alerts | Depot departure, customer arrival, exit from permitted zones, unplanned stops | Yes |
| Cargo temperature | Probes in the reefer body with door sensors, shown next to location | Optional probes |
| WASL reporting | TGA-approved device data forwarded to the WASL platform for licensed freight | Where required |
| Offline buffering | Positions stored during signal gaps and uploaded afterwards | Yes |
Compliance for licensed freight operators
Freight transport is among the activities the TGA licenses, and licensed operators are typically required to fit approved tracking devices and link them to the WASL platform. HHET supplies devices that meet the TGA's technical requirements and completes the linking for each truck as part of the installation; the details, and the process for adding trucks later, are on our TGA-approved tracking and WASL integration page.
WASL obligations depend on your licence type and are updated by the TGA. HHET confirms the current requirement for your freight activity before quoting, so you install once.
Fuel, trailers and the rest of the fleet
Fuel is the first place truck operators look for savings, and the fuel graph a tracker produces is the fastest way to see idling at loading bays, unexplained drops at night and refuels that do not match the card statement; our fleet fuel monitoring system page explains the sensor types and calibration. Trailers and containers that spend weeks parked need battery-powered units of their own, covered under GPS trackers for trailers and containers. Once trucks, trailers and the yard pickups are all reporting, the fleet management system brings them into one map with scheduled reports for dispatch, finance and the workshop.
Refrigerated trucks
For reefers carrying food or pharmaceuticals, location alone does not answer the customer's question. HHET fits temperature probes and door sensors to the same tracker, so refrigerated truck monitoring shows the cargo temperature curve next to the route for every trip, raises an alert when the set point is exceeded or a door stays open, and produces the records that Saudi Food & Drug Authority (SFDA) inspections and pharmaceutical customers ask for.
Installation and what drives the price
HHET installs at your yard, at the port or at our Jeddah base. Each truck gets a documented installation: device location, wiring, antenna placement, a power-cut test and a confirmed first report on the platform. The price per truck depends on the device class, the sensors (fuel, driver ID, temperature, trailer unit), the number of vehicles and the subscription term. A basic 24 V tracker on a tractor unit is a different job from a reefer with fuel and temperature sensors, so HHET quotes per fleet. Request a quote with your truck list, routes and licence type and we will return a line-by-line proposal.
A truck earns its keep differently in each business. The logistics and transport page looks at line-haul and distribution fleets, while construction fleet tracking covers tippers, mixers and equipment carriers that move between sites.
Last reviewed .

